|PRE-CATALYZED LACQUERS, SEALERS & PRIMERS
A Pre-catalyzed range of single pack lacquers, modified with Melamine to improve resistance and wearing properties. Fiddes Pre-catalyzed Lacquer combines ease of application with good build qualities to produce a hard, quick drying finish suitable for the majority of internal wood substrates.
Fiddes Pre-catalyzed Lacquer is ideal for application on Fiddes High Density Basecoat or Cellulose Sealer.
Hydrocardon Free (HCF)
A Pre-catalyzed range of Hydrocarbon Free (HCF) Lacquers, Sealers & Primers is also available, offering excellent build and improved through drying on MDF substrates. See separate section for full technical details.
Pigmented Color Matching:
Fiddes Pre-catalyzed Lacquer is also available in a wide range of colors, either matched to your own specification or to an existing color chart (RAL / BS4800 / PANTONE / DULUX).
Key Product Benefits:
• Excellent durability
• High build
• Single pack
• Quick drying
Basecoat / Sealer / Primer
Viscosity: 40/50 Secs Re-Coat: 45/60 Mins
High Density Basecoat:
Viscosity: 55/65 Secs Re-Coat: 45/60 Mins
P/C White Primer:
Viscosity: 85/100 Secs Re-Coat: 45/60 Mins
Sheen: 10% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
P/C Semi Matt:
Sheen: 20% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
Sheen: 50% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
P/C Semi Gloss:
Sheen: 60% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
Sheen: N/A Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
Sand the wooden substrate in stages, working with a medium sandpaper
(120 grit), through to a medium / fine grade (180–220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.
Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.
Formulated for spray application through conventional, airless or HVLP systems.
Add 10/15% Fiddes Cellulose Thinners if required.
Always stir contents well and chEck sheen before use.
Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.
Air Pressure: 45-60 psi
Fluid Pressure: 10-15 psi
Coverage: 8sq. metres per litre approx.
Touch Dry: 20 mins
Re-coat: 45-60 mins
Thinner: Precat / Cellulose Thinners
Packaging: 5lt-25lt-205lt containers
Suitable For Application on Fiddes Wood Dyes & Stains: NGR Spirit – L/F Water Stains – Matching Stains – Non Strike Stains