|PINE WATER STAINS
Fiddes range of Pine Water Stains are recommended for use on new or old pine furniture where an antique, aged appearance is preferred. Exceptionally easy to use, Fiddes Pine Water Stains are extensively used throughout the Antique Pine and Pine Reproduction markets to create a uniform color prior to an application of Fiddes Supreme Wax Polish.
Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 – 220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Wood Dyes. Take care to remove all traces of sanding dust and test the chosen Fiddes Wood Dye on a similar substrate to verify color / shade.
Stir the contents well and always check the shade before application.
Take a clean, lint free cotton cloth or sponge and apply in the direction of the wood grain where possible. Take care to remove any excess stain immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. To obtain a uniform colour, always wipe evenly, blending the stain over the whole surface area by exerting a degree of pressure when applying by hand. Leave to dry, and do not sand between coats.
The application of additional coats will deepen the existing color / shade.
• Application: Cloth, Brush, Sponge, Spray, Dip.
• Dry Time: 1 hour at room temperature.
• Coverage: 16 sqm per Litre (depending on substrate and method of application)
• Coats: 1 coat – further coats will deepen color / shade.
• Thinners: Water.
• Recommended for use on: Fine Furniture, Doors, Floors, Cabinet Work and Panelling.
• Packaging: 1lt – 2lt – 5lt – 25lt containers.
|This color chart is for guidance only. Always stir contents well and check color.
Colors can be matched to meet your specification.