HIGH SOLIDS WATERBORNE LACQUER

A high solids, non yellowing, low odour water based lacquer which is ideal for spray or brush application on hardwood and softwood substrates. Manufactured to comply with the Environmental Protection Act 1990, Fiddes range of water based lacquers are single pack, internally cross linking and are exceptionally easy to apply.

Pigmented Color Matching

Fiddes Waterborne Lacquer is also available in a wide range of colors, either matched to your own specification or to an existing color chart (RAL / BS4800 / PANTONE / DULUX).


Key Product Benefits

Ease of application
High build
Single pack
Quick drying
Low odour & non flammable
Complies with E.P.A. regulations

Product Data

Waterbourne Sealer:
Viscosity: 58/65 Secs.
Re-Coat: 45/60 Mins

Waterbourne Primer:
Viscosity: 55/60 Secs.
Re-Coat: 45/60 Mins

Waterbourne Lacquer:

W/B Matt:
Sheen:
10%   Viscosity: 58/65 Secs.   Re-Coat: 45/60 Mins

W/B Semi Matt:
Sheen:
20%   Viscosity: 58/65 Secs.   Re-Coat: 45/60 Mins

W/B Satin:
Sheen:
50%   Viscosity: 58/65 Secs.   Re-Coat: 45/60 Mins

W/B Semi Gloss:
Sheen:
60%   Viscosity: 58/65 Secs.   Re-Coat: 45/60 Mins

W/B Gloss
Sheen:
N/A     Viscosity: 58/65 Secs.   Re-Coat: 45/60 Mins

Preparation

Sand the wooden substrate in stages, working with a medium sandpaper (120 grit), through to a medium / fine grade (180 220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.

Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.

Application

Formulated for spray application through conventional, airless or HVLP systems.

Add 5% water if required. Higher temperatures will reduce drying times.

Always protect from frost and spray in temperatures above 20c.

Always stir contents well and check sheen before use.

Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.


Air Pressure:
45-60 psi

Fluid Pressure:
10-15 psi

Coverage:
8sq. metres per litre approx.

Touch Dry:
20 mins

Re-coat:
45-60 mins

Thinner:
Water

Packaging:
5lt-25lt-205lt containers

Suitable For Application on Fiddes Wood Dyes & Stains:
NGR Spirit L/F Water Stains Matching Stains Non Strike Stains
COMPANY
CONTACT
LINKS
MARKETING
FIDDES-USA

PRODUCTS

FLOOR FINISHES

WOOD DYES

SPRAY FINISHES

High Solids Waterborne Lacquer
Decorative & Special Effect Finishes
Bonehard Nitrocellulose Lacquers & Sealers
Acid Catalyst Lacquers, Sealers & Primers
Pre-Catalyzed Lacquers, Sealers & Primers
HCF Pre-Catalyzed Lacquers, Sealers & Primers

SUPREME WAX

ANTIQUE WAX

DECORATIVE & PROTECTIVE WAX

OIL FINISHES

SHELLAC POLISH

STRIPPERS, CHEMICALS, & SOLVENTS

ABRASIVES & STEEL WOOL

WOOD FILLERS

PROTECTIVE EQUIPMENT

BRUSHES