HCF PRE-CATALYZED LACQUERS, SEALERS & PRIMERS

Fiddes Hydrocarbon Free (HCF) range of Lacquers, Sealers and Primers remain excellent for application on to standard wood substrates, and in particular MDF.

Fiddes HCF Pre-catalysed Lacquer is ideal for application on Fiddes HCF High Density Basecoat or HCF Cellulose Sealer.

Pigmented Color Matching:

Fiddes HCF Pre-catalysed Lacquer is also available in a wide range of colors, either matched to your own specification or to an existing color chart (RAL / BS4800 / PANTONE / DULUX).

Key Product Benefits:

Hydrocarbon Free 
Ease of Application 
Single pack
High Build 
Improved Drying on MDF 
Durable


Product Data:

     Basecoat / Sealer / Primer

     HCF Cellulose Sealer:  
    
Sheen: N/A  Viscosity: 40/50 Secs Re-Coat: 45/60 Mins

     HCF High Density Basecoat: 
    
Sheen: N/A Viscosity: 55/65 Secs Re-Coat: 45/60 Mins

     HCF P/C White Primer:
    
Sheen: N/A Viscosity: 85/100 Secs Re-Coat: 45/60 Mins

     HCF Pre-Catalysed Lacquer

     HCF Matt:  

     Sheen: 10% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins


     HCF Semi Matt:  
    
Sheen: 20%  Viscosity: 50/65 Secs Re-Coat: 45/60 Mins

     HCF Satin:  
    
Sheen: 50% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins

     HCF Semi Gloss:  

     Sheen: 60% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins


     HCF Gloss: 

     Sheen: N/A Viscosity: 50/65 Secs Re-Coat: 45/60 Mins


Preparation

Sand the wooden substrate in stages, working with a medium sandpaper
(120 grit ), through to a medium / fine grade (180 220 grit ). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.

Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.
Application

Formulated for spray application through conventional, airless or HVLP systems.


Add 10/15% Fiddes Cellulose Thinners if required.

Always stir contents well and chEck sheen before use.

Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.

Air Pressure:
45-60 psi 
Fluid Pressure:
10-15 psi
Coverage: 
8sq. metres per litre approx.
Touch Dry: 
20 mins
Re-coat: 
45-60 mins
Thinner:
HCF Thinners
Packaging:
5lt-25lt-205lt containers

Suitable For Application on Fiddes Wood Dyes & Stains: NGR Spirit L/F Water Stains Matching Stains Non Strike Stains
COMPANY
CONTACT
LINKS
MARKETING
FIDDES-USA

PRODUCTS

FLOOR FINISHES

WOOD DYES

SPRAY FINISHES

High Solids Waterborne Lacquer
Decorative & Special Effect Finishes
Bonehard Nitrocellulose Lacquers & Sealers
Acid Catalyst Lacquers, Sealers & Primers
Pre-Catalyzed Lacquers, Sealers & Primers
HCF Pre-Catalyzed Lacquers, Sealers & Primers

SUPREME WAX

ANTIQUE WAX

DECORATIVE & PROTECTIVE WAX

OIL FINISHES

SHELLAC POLISH

STRIPPERS, CHEMICALS, & SOLVENTS

ABRASIVES & STEEL WOOL

WOOD FILLERS

PROTECTIVE EQUIPMENT

BRUSHES