|BONEHARD NITROCELLULOSE LACQUERS & SEALERS
A Nitrocellulose based range of single pack lacquers, offering good durability combined with ease of use for application on to most interior wood substrates. Fiddes Bonehard Lacquer can also be ‘Pulled Over’, enhancing the resulting finish still further. Ideal for application on Fiddes High Density Basecoat or Cellulose Sealer.
Key Product Benefits:
• Ease of application
• High build
• Single pack
• Quick drying
• Options for ‘pulling over’
Viscosity: 40/50 Secs Re-Coat: 45/60 Mins
Sheen: 10% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
N/C Semi Matt:
Sheen: 20% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
Sheen: 50% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
N/C Semi Gloss:
Sheen: 60% Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
Sheen: N/A Viscosity: 50/65 Secs Re-Coat: 45/60 Mins
Sand the wooden substrate in stages, working with a medium sandpaper
(120 grit), through to a medium / fine grade (180 –220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.
Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.
Formulated for spray application through conventional, airless or HVLP systems.
Add 10 - 15% Fiddes Cellulose Thinners if required.
Always stir contents well and check sheen before use.
Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.
Air Pressure: 45-60 psi
Fluid Pressure: 10-15 psi
Coverage: 8sq. metres per litre approx.
Touch Dry: 20 mins
Re-coat: 45-60 mins
Thinner: Precat / Cellulose Thinner
Packaging: 5lt-25lt-205lt containers
Suitable For Application on Fiddes Wood Dyes & Stains: NGR Spirit – L/F Water Stains – Matching Stains – Non Strike Stains