ACID CATALYST LACQUERS, SEALERS & PRIMERS

An Acid catalysed, twin pack, high solids range of lacquers, formulated to provide very high standards of resistance and surface abrasion on most interior wood surfaces. Exhibiting excellent flow and high build qualities, Fiddes A/C Lacquers should be applied in areas where durability and quality of finish are the main requirements.

Pigmented Color Matching:

Fiddes Acid-catalysed Lacquer is also available in a wide range of colours, either matched to your own specification or to an existing colour chart (RAL / BS4800 / PANTONE / DULUX).

Key Product Benefits:

Excellent durability
High build 
Self levelling
Good flow on application
Severe use rating

Product Data:

Basecoat / Sealer / Primer

A/C Basecoat:  
Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C White Primer:   
Viscosity: 85/100 Secs Re-Coat: 45/60 Mins 

Acid Catalysed Lacquer

A/C Matt:
Sheen: 10% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C Semi Matt:  
Sheen: 20% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C Satin:   

Sheen: 50%  Viscosity: 40/55 Secs Re-Coat: 60/90 Mins


A/C Semi Gloss:  
Sheen: 60% Viscosity: 40/55 Secs Re-Coat: 60/90 Mins

A/C Gloss:                
Sheen: N/A    Viscosity: 40/55 Secs Re-Coat: 60/90 Mins


Product Ratio

Acid Catalyst: 10:1 By Volume

Preparation

Sand the wooden substrate in stages, working with a medium sandpaper
120 grit), through to a medium / fine grade (180 220 grit). Always sand in the direction of the grain pattern where possible, ensuring the removal of any blemishes and glue residue prior to the application of Fiddes Spray Lacquers. Take care to remove all traces of sanding dust and test the chosen sheen level on a similar substrate before application.

Always stir the contents well and ensure all Fiddes Spray Lacquers are applied in a dust free environment with sufficient ventilation.

Application

Formulated for spray application through conventional, airless or HVLP systems.

Add 10/15% Fiddes A/C Thinners if required.

Always add the Catalyst at a ratio of 10:1 before thinning. It is important that the correct ratio is used at all times.

Always stir contents well and check sheen before use.

Contact Fiddes Technical Department for specific advice on different spraying techniques and finishing options.


Acid Catalyst Ratio:
10:1
Air Pressure: 
45-60 psi 
Fluid Pressure:
10-15 psi
Coverage: 
8sq. metres per litre approx.
Touch Dry: 
20 mins
Re-coat:
60 - 90 mins
Thinner: 
A/C Thinners
Packaging:
5lt-25lt-205lt containers

Suitable For Application on Fiddes Wood Dyes & Stains: NGR Spirit L/F Water Stains Matching Stains Non Strike Stains
COMPANY
CONTACT
LINKS
MARKETING
FIDDES-USA

PRODUCTS

FLOOR FINISHES

WOOD DYES

SPRAY FINISHES

High Solids Waterborne Lacquer
Decorative & Special Effect Finishes
Bonehard Nitrocellulose Lacquers & Sealers
Acid Catalyst Lacquers, Sealers & Primers
Pre-Catalyzed Lacquers, Sealers & Primers
HCF Pre-Catalyzed Lacquers, Sealers & Primers

SUPREME WAX

ANTIQUE WAX

DECORATIVE & PROTECTIVE WAX

OIL FINISHES

SHELLAC POLISH

STRIPPERS, CHEMICALS, & SOLVENTS

ABRASIVES & STEEL WOOL

WOOD FILLERS

PROTECTIVE EQUIPMENT

BRUSHES